Hello and help!

I am trying to use my new TTL serial camera for a project that is due on Thursday. I want to use the motion detect function to activate a servo. I checked the camera and adjusted the settings using the CommTool, and wired the camera to the Arduino, but I keep getting “no camera found.” I checked and redid all my connections; I also checked to make sure I had imported all of the libraries I need. I’m not sure what else to try. A photo of the wiring is attached (the violet wire is TX) and the code is below. Please help! Thanks, Alix

What I am using is a TTL Jpeg Serial Camera connected to digital pins 2 and 3 and an SD Card breakout that connects to digital pins 10 through 13 on the arduino. I have been able to take snapshots with the camera by itself and save them to the SD card but I have not been able to make it work as a part of the whole setup. TTL Serial Camera I am using an Arduino Uno and I am trying to hook up a Camera to the RX and TX input/output. In the code for testing the camera, they use Serial1.begin. Apr 30, 2020 This article is a quick getting started guide for the ESP32-CAM board. We’ll show you how to setup a video streaming web server with face recognition and detection in less than 5 minutes with Arduino IDE.

/////////////////////////////
//VARS

#include <Servo.h>
#include <Adafruit_VC0706.h>
#include <SD.h>
#include <SoftwareSerial.h>
//int LDR_Pin = A1; //light detector to pin A0
//int LDRValue = 0; // int to store LDR value
//int light_sensitivity = 0; // value of light surrounding sensor
int ledPin = 13;
// Using SoftwareSerial (Arduino 1.0+) or NewSoftSerial (Arduino 0023 & prior):
#if ARDUINO >= 100
// On Uno: camera TX connected to pin 2, camera RX to pin 3:
SoftwareSerial cameraconnection = SoftwareSerial(2, 3);
// On Mega: camera TX connected to pin 69 (A15), camera RX to pin 3:
//SoftwareSerial cameraconnection = SoftwareSerial(69, 3);
#else
NewSoftSerial cameraconnection = NewSoftSerial(2, 3);
#endif
Adafruit_VC0706 cam = Adafruit_VC0706(&cameraconnection);

//int timerValue = 0;
//int minuteValue = 1;

Servo myservo; // create servo object to control a servo
// twelve servo objects can be created on most boards
boolean lockLow = true;
boolean takeLowTime;
int pos = 0; // variable to store the servo position
int r = 0; // variable to store random number
/////////////////////////////
//SETUP
void setup(){
Serial.begin(9600);
Serial.println(“VC0706 Camera test”); //test for camera
if (cam.begin()) {
Serial.println(“Camera Found:”);
} else {
Serial.println(“No camera found?”);
return;
cam.setMotionDetect(true); // turn it on motion detected = true
Serial.print('Motion detection is ');
if (cam.getMotionDetect())
Serial.println(“ON”);
else
Serial.println(“OFF”);
}

pinMode(ledPin, OUTPUT);
//calibrateLight();
myservo.attach(9); // attaches the servo on pin 9 to the servo object
}
////////////////////////////
//LOOP
void loop()
{
// LDRValue = analogRead(LDR_Pin); //read the analogue value of the light sensor
// Serial.println(LDRValue);
// delay(10);
//if(LDRValue < light_sensitivity)
if (cam.motionDetected()) {
Serial.println(“Motion!”);
digitalWrite(13, HIGH);
r = int(random (0,180));
Serial.println(r);
if (r > pos)
{
for(pos; pos <= r; pos += 10) // goes from 0 degrees to 180 degrees
{ // in steps of 1 degree
myservo.write(pos); // tell servo to go to position in variable ‘pos’
delay(10); // waits 15ms for the servo to reach the position

}
}

Usb ttl serial cable

Arduino Usb Ttl

if (r < pos){
for(pos; pos >= r; pos-=1) // goes from 180 degrees to 0 degrees
{
myservo.write(pos); // tell servo to go to position in variable ‘pos’
delay(10); // waits 15ms for the servo to reach the position

}
}
}

else
{
digitalWrite(13, LOW);
}

//the led visualizes the sensors output pin state
if(lockLow){
//makes sure we wait for a transition to LOW before any further output is made:
lockLow = false;
cam.setMotionDetect(false);
Serial.println('—');
Serial.print(“motion detected at “);
Serial.print(millis()/1000);
Serial.println(” sec”);
delay(15);
}

// timerValue += 10;
//
// if(timerValue >= 1800000){
// calibrateLight();
// timerValue =0;
// }
//
// }
//
//void calibrateLight(){ //calibration function defined
// float brightness = 0; //initial value = 0
// for(int i = 0; i<250; i++){
// brightness += analogRead(LDR_Pin);
// float divideRate = 10000/250; //10 seconds divided by 250 samples
// delay(divideRate); // evenly space time between samples
// }
//
// brightness = brightness/250; //average brightness
// light_sensitivity = brightness; //calibrated value
// light_sensitivity -= 20; //amount of interruption to activate servo
// Serial.print(“sensor calibrated at”);
// Serial.println(light_sensitivity);
Serial.println('…Done!');
cam.resumeVideo();
cam.setMotionDetect(true);
}

Arduino

How to make your own spy cam!

  • 27,318 views
  • 5 comments
  • 13 respects

Components and supplies

Apps and online services

Arduino IDE
Ttl serial camera arduino download

About this project

in todays video I show you how to setting up esp cam with your own arduino.

full tutorial on my youtube channel

What is esp32 :

is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth.

Subscribe to my youtube channel

Follow me on instagram

what is esp32-cam ?

The ESP32-CAM is a small camera module with the ESP32-S chip that costs approximately $10. Besides the OV2640 camera, and several GPIOs to connect peripherals, it also features a microSD card slot that can be useful to store images taken with the camera or to store files to serve to clients.

Subscribe to my youtube channel

Ttl serial camera arduino tutorial

Follow me on instagram

ESP32-CAM Specifications :

Ttl Serial Camera Arduino Programming

  • The smallest 802.11b/g/n Wi-Fi BT SoC Module
  • Low power 32-bit CPU, can also serve the application processor
  • Up to 160MHz clock speed,summary computing power up to 600 DMIPS
  • Built-in 520 KB SRAM, external 4MPSRAM
  • Supports UART/SPI/I2C/PWM/ADC/DAC
  • Support OV2640 and OV7670 cameras, Built-in Flash lamp.
  • Support image WiFI upload
  • Support TF card
  • Supports multiple sleep modes
  • Embedded Lwip and FreeRTOS
  • Supports STA/AP/STA+AP operation mode
  • Support Smart Config/AirKiss technology
  • Support for serial port local and remote firmware upgrades (FOTA)

Subscribe to my youtube channel

Follow me on instagram

Subscribe to my youtube channel

Follow me on instagram

Code

Schematics

Ttl Serial Camera Arduino Code

Author

CiferTech
  • 2 projects
  • 18 followers

Published on

October 10, 2019
Write a comment

Members who respect this project

and 6 others

See similar projects
you might like

Table of contents

Write a comment